This breakout board for the KFLOP motion controller GPIO Connector (JP7) provides the option of direct connected IO with pull down resistors and filter capacitors or Optically isolated inputs that an be used with 3.3V to 24V signals.
Design is provided as is. It is the users responsibility to determine if design is correct for their application.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | HDR-IDC-HORN-2.54-2X13P | P1 | HDR-IDC-HORN-2.54-2X13P | 1 |
2 | 1uF | C4,C1,C2,C3 | 0603 | 4 |
3 | Header-Male-2.54_1x3 | IO_44,IO_45,IO_0,IO_1,IO_2,IO_3,IO_4,IO_8,IO_12,IO_5,IO_9,IO_13,IO_6,IO_7,IO_10,IO_11,IO_14,IO_15 | HDR-3X1/2.54 | 18 |
4 | 470Ω | R1,R4,R7,R10,R13,R16,R19,R22,R25,R28,R31,R34,R37,R40,R43,R46,R49,R52 | 0603 | 18 |
5 | 1nF | C5,C6,C7,C8,C9,C10,C11,C12,C13,C14,C15,C16,C17,C18,C19,C20,C21,C22 | 0603 | 18 |
6 | 3.3KΩ | R2,R5,R8,R11,R14,R17,R20,R23,R26,R29,R32,R35,R38,R41,R44,R47,R50,R53 | 0603 | 18 |
7 | 1.78KΩ | R3,R6,R9,R12,R15,R18,R21,R24,R27,R30,R33,R36,R39,R42,R45,R48,R51,R54 | 0603 | 18 |
8 | TLP291(GB-TP,SE(T | U3,U1,U2,U4,U5,U6,U7,U8,U9,U10,U11,U12,U13,U14,U15,U16,U17,U18 | SOP-4_P1.27 | 18 |
9 | IO_Conn | P20,P21 | 1985302_Phoenix Contact | 2 |
Comments (0)