© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Ambient Controller 3Dprinter Enclosure
License: GPL 3.0
Mode: Editors' pick
test1
Open in Editorold_Ambient Controller PCB v0.9
Open in Editorold_Ambient Controller 3Dprinter Enclosure V0.4 (Prototype Tested)
Open in EditorAmbient Controller 3Dprinter v1.0
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | Adafruit_Feather_M0_Basic | U2 | FEATHER-M0-BASIC | 1 |
2 | 0x45 Adafruit SHT31-D | TH-TOP | XH 2.54-5P I2C | 1 |
3 | 0x44 Adafruit SHT31-D | TH-BOT | XH 2.54-5P I2C | 1 |
4 | SMALL_SERVO | M1,M2,M3,M4 | 1X03 | 4 |
5 | 128X64 OLED Adafruit | U5 | 128X64 OLED ADAFRUIT | 1 |
6 | Heltec Touch Module Red | B_RED | CON3 JST XH 2.54-3 PIN | 1 |
7 | Heltec Touch Module Blue | B_BLUE | CON3 JST XH 2.54-3 PIN | 1 |
8 | 100 | R1,R2 | AXIAL-0.3 | 2 |
9 | 3.3k | R3,R4 | AXIAL-0.3 | 2 |
10 | 1N60PST | D1,D2,D3,D4 | DO-35 | 4 |
11 | 0.1u | C1,C4,C9 | RAD-0.1 | 3 |
12 | 1.4 | R5,R7 | AXIAL-0.5 | 2 |
13 | 1k | R6,R8,R9 | AXIAL-0.3 | 3 |
14 | 22u | C5,C6,C7 | CAP-D5.0XF2.0 | 3 |
15 | 1000u | C8 | CAP-D10.0XF5.0 | 1 |
16 | M023.5MM | JP1 | SCREWTERMINAL-3.5MM-2 | 1 |
17 | 220u | C10 | CAP-D6.3XF2.5 | 1 |
Unfold
Loading...
Do you need to add this project to the album?