© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Wemos & DHT11 Node
License: MIT
Mode: Editors' pick
This is V2 of my DHT11 shield for the D1-Mini. It is powered by the USB port on the D1-Mini. The two 0603 footprints are jumpers, to select which pin of the D1-Mini is receiving the data (specified on bottom of board with arrows).
Ignore the 0603 parts in the BOM, they are not parts to buy, only jumpers to be soldered.
Also, 2 of 1x8 female pin headers should be added to the BOM to insert the D1-Mini into.
ID | Name | Designator | Footprint | Quantity | BOM_Manufacturer Part |
---|---|---|---|---|---|
1 | DHT11 | U1 | SENSOR-TH_DHT11 | 1 | DHT11 |
2 | WEMOS D1 MINI | U3 | WEMOS D1 MINI | 1 | Wemos D1 mini |
3 | 0 | J2,J1 | R0603 | 2 | RC0603JR-0710KL |
Unfold
Loading...
Do you need to add this project to the album?