© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Dimmer12V
License: Public Domain
Mode: Editors' pick
The first opamp is an oscilator. The signal over the 2.2nF capacitor is sawtooth like. The second opamp is a comparitor that compairs the set voltage to the sawtooth and opens and closes the Fet. This FET does not need a gat transistor as it will switch on/of within the 5 volt range.
Potmeter can be replaced by 5 volt signal that comes from other source.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 2.2nF | C1 | C1206 | 1 |
2 | 10uF | C2 | CAP-SMD_L3.5-W2.8-R-RD | 1 |
3 | SUF4007 | D1 | DO-213AB_L5.0-W2.5-RD | 1 |
4 | Phoenix MCV 1,5/ 4-G-3,81 | J2 | PHOENIXCONTACT_MCV-G_04X3.81MM_VERTICAL | 1 |
5 | POTENTIOMETER | POT | POTMETER 5MM RASTER | 1 |
6 | 10K | R1,R2 | R1210 | 2 |
7 | 100K | R3,R4 | R1210 | 2 |
8 | AP78L05YG-13 | U1 | SOT-89-3_L4.5-W2.5-P1.50-LS4.2-TL | 1 |
9 | P0903BDG | U3 | TO-252-3_L6.5-W5.8-P4.58-TL | 1 |
10 | LM358MX/NOPB | U2 | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | 1 |
Unfold
Loading...
Do you need to add this project to the album?