36v double dc motor 350w controller with options audio and USB 3 to charge and connect the battery.

1st: I use EasyEDA to complete my project.
2nd: I've some part in my house that could be assembled (Rubycon-63v.470uf/Hooya-Hy1707P Mosfets) got enough of this for my project.
3rd: I've to put inside the design of HD Screen with GPS(google if possible or no GPS), and normal Speed and his position 1to3 in km/h; 2xBattery 1 for motor, and 2nd used for lights and audio capacity. 

4th: On the PCB we must put 1x12v 3pin for premade Audio module; 6x12v two pins, 3x12v 3pins for Motorbike lights stop and others; 1x12v LED 4pins and 1x5v 4(-1) pins (3pins).
(All of these on the Screen so i need a programmer maybe or some good driver to put on the board would be enough.)

5th: After completing PCB I'm going to use it on homemade scooter, I'll go first for the controller and battery, I'll buy 2x350w motors to fit.