© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD NANO CHARGER
Mode: Editors' pick
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | LM350T | U3 | TO-220(TO-220-3) | 1 |
2 | HLK-PM01 | U1 | PWRM-TH_HLK-PM01 | 1 |
3 | 220nF | C3,C2 | CAP-TH_D1.2-L12.6-W4.5-H13.9-PITCH10 | 2 |
4 | Variable_resistor 10K | U4 | VARIABLE_POT REGULAR | 1 |
5 | Variable_resistor 1K | U5 | VARIABLE_POT REGULAR | 1 |
6 | ARDUINO_NANO | U2 | ARDUINO_NANO | 1 |
7 | 1N5408 | D4,D2,D3,D1,D6 | DO-201AD | 5 |
8 | BORNERA_CIRCUITO_IMPRESO_2PINES | P4,AC1,AC3,P1,P8,P5,P6,P3,P9 | BORNERA 2 PINES | 9 |
9 | 47u | C4 | CAP-D5.0XF5.0 | 1 |
10 | 5x20 BLX-Atype Fuse holder XC-7 | F1 | 5X20-BLX-A | 1 |
11 | 1k | R1,R2 | AXIAL-0.3 | 2 |
12 | 2.2k | R3,R6 | AXIAL-0.3 | 2 |
13 | 22k | R4 | AXIAL-0.3 | 1 |
14 | 10k | R5 | AXIAL-0.3 | 1 |
15 | 220 | R9 | AXIAL-0.3 | 1 |
16 | MP3-TF-16P | M1 | MP3-TF-16P-MODULE | 1 |
17 | TRIMP multiturn | R10 | PCB_TRIM_POT_PARALELO | 1 |
18 | 1N4007 | D5 | DO-41 | 1 |
19 | 3300uF | C1 | CAP-TH_D1.2-L13-H20-PITCH5.0 | 1 |
20 | LED-3MM | LED1 | LED-3MM/2.54 | 1 |
Unfold
Loading...
Do you need to add this project to the album?