Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
SparkFun 6 Degrees of Freedom Breakout - LSM303C
License:
Mode:Editors' pick
655
0
0
0
Update time:
2021-04-11 14:05:44
Creation time:
2016-07-15 02:56:26
Description
![enter image description here][1]
![enter image description here][2]
**Description**: The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with its low cost, the LSM303C was perfect for us to create this small breakout board just for you! Each LSM303C Breakout has been designed to be super-flexible and can be configured specifically for many applications. The LSM303C Breakout can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection!
The range of each sensor on the LSM303C is configurable: the accelerometer’s scale can be set to ±2g, ±4g, ±6g, or ±8g, while the magnetometer has full-scale range of ±16 gauss, and supports I2C and SPI communication.
Each pin has been broken out on the LSM303C, with 10 plated through hole connections featuring power and I2C and SPI functionality, interrupt outputs, and accelerometer and magnetometer data out. Please keep in mind that the LSM303C is a 2.5V device so supplying voltages greater than ~4.8V can permanently damage the IC. As long as your Arduino has a 3.3V supply output, you shouldn’t need any extra level shifting.
**Features**:
3 magnetic field channels and 3 acceleration channels
±16 gauss magnetic full scale
±2/±4/±8 g selectable acceleration full scale
16-bit data output
SPI / I2C serial interfaces
Analog supply voltage 1.9 V to 3.6 V
Power-down mode / low-power mode
Programmable interrupt generators for freefall, motion detection and magnetic field detection
Embedded temperature sensor
Embedded FIFO
For more detail and Documents, Please visit: http://www.sparkfun.com/products/13303
[1]: /editor/20160717/578baa11792f1.png
[2]: /editor/20160718/578bacbd68cb8.png
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to sparkfun
Delete
Comment
Are you sure to delete the comment?
Report
SparkFun 6 Degrees of Freedom Breakout - LSM303C
No Profile
Announcer: SparkFun
Creation time: 2016-07-15 02:56:26
Published time:
2021-04-11 14:05:44
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal