Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
SparkFun Humidity and Temperature Sensor Breakout - SHT15
License:
Mode:Editors' pick
869
0
0
1
Update time:
2021-04-10 08:30:02
Creation time:
2016-07-15 02:56:26
Description
![enter image description here][1]
![enter image description here][2]
**Description**: The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens® technology integrates two sensors and readout circuitry on one single chip. All you need is two lines for 2-wire communication, and you’ll have relative humidity and temperature readings to help you sense the world around you!
The two sensors built into the SHT15 have been seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit resulting in superior signal quality, fast response time, and a strong resistance to external disturbances. Additionally, the on board SHT15 features a 0-100% RH measurement range with a temperature accuracy of +/- 0.3°C @ 25°C. There are only four pins that need to be hooked up in order to start using this sensor in a project. One for VCC, one for GND, and the two data lines SDA and SCL.
**Features**:
Operating Voltages: 2.4V min - 5.5V max
2 factory calibrated sensors for relative humidity & temperature
Digital 2-wire interface (Not I2C, but similar)
Measurement range: 0-100% RH
Absolute RH accuracy: +/- 2% RH (10…90% RH)
Repeatability RH: +/- 0.1% RH
Temp. accuracy: +/- 0.3°C @ 25°C
Precise dewpoint calculation possible
Fast response time
Low power consumption (typ. 30 µW)
For more detail and Documents, Please visit: http://www.sparkfun.com/products/13683
[1]: /editor/20160717/578ba6f5ee170.png
[2]: /editor/20160717/578ba6fb13766.png
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to sparkfun
Delete
Comment
Are you sure to delete the comment?
Report
SparkFun Humidity and Temperature Sensor Breakout - SHT15
No Profile
Announcer: SparkFun
Creation time: 2016-07-15 02:56:26
Published time:
2021-04-10 08:30:02
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal