© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Torbjorn Turret Arduino Mega Shield mk 3
Mode: Editors' pick
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ESC 1 | ESC5 | 1X03 | 1 |
2 | ESC 2 | ESC6 | 1X03 | 1 |
3 | ESC 3 | ESC7 | 1X03 | 1 |
4 | ESC 4 | ESC8 | 1X03 | 1 |
5 | Servo Bolt Left | SERVO_BOLT_LEFT | 1X03 | 1 |
6 | Servo Bolt Right | SERVO_BOLT_RIGHT | 1X03 | 1 |
7 | Servo Barrel Left | SERVO_BARREL_LEFT | 1X03 | 1 |
8 | Servo Barrel Right | SERVO_BARREL_RIGHT | 1X03 | 1 |
9 | Li-Po Battery | X2 | XT60 | 1 |
10 | RELAYSONGLE | U4 | JZC-SRD-5VDC-SL-C | 1 |
11 | CON_TERMINAL_BLOCK_02-5MM | STEP_DOWN_IN,STEP_DOWN_OUT,FAN3,FAN4,ANG_ANGLE,BU_ANGLE | TERMINAL_BLOCK_2P_5 | 6 |
12 | Mot1 + | MOT1+,MOT2+,MOT3+,MOT4+ | RECTANGLE PAD 1,5 X 3 MM | 4 |
13 | Mot1 - | MOT1-,MOT2-,MOT3-,MOT4- | RECTANGLE PAD 1,5 X 3 MM | 4 |
14 | CON_HEADER_1X04 | TTL_HEADER1_1,TTL_HEADER1_2,RASPBERRYPI_COMMUNICATION | M1X4 | 3 |
15 | Terminal_Block-7Pin_RevE_Date15jun2010 | SLIP_RING | 7 POS SCREW TERMINAL BLOCK 5MM - | 1 |
16 | Pot_Barrel | POT_BARREL | 1X03 | 1 |
17 | POT_Bolt | POT_BOLT | 1X03 | 1 |
18 | SW_Pan_Motor | SW_PAN_MOTOR | 1X03 | 1 |
19 | SW_Tilt_Motor | SW_TILT_MOTOR | 1X03 | 1 |
20 | SW_BLDC_MOT | SW_BLDC_MOT | 1X03 | 1 |
21 | SW_Blower_Test | SW_BLOWER_TEST | 1X03 | 1 |
22 | SW_BLDC_Run | SW_BLDC_RUN | 1X03 | 1 |
23 | SW_Test_Mode | SW_TEST_MODE | 1X03 | 1 |
24 | Speaker | SPEAKER | 1X03 | 1 |
25 | 10KOHM-1_4W5%(PTH) | R10,R11,R12,R13,R14,R15,R16,R17 | AXIAL-0.3 | 8 |
26 | RC RX 1 | RCRX1 | 1X03 | 1 |
27 | RC RX 2 | RCRX2 | 1X03 | 1 |
28 | RC RX Vin | P1 | HDR-1X2/2.54 | 1 |
29 | AUX Serial Communication | P2 | HDR-1X2/2.54 | 1 |
30 | AUX 5V Power 1 | P3 | HDR-1X2/2.54 | 1 |
31 | AUX 5V Power 2 | P4 | HDR-1X2/2.54 | 1 |
32 | AUX 12V Power 1 | P5 | HDR-1X2/2.54 | 1 |
33 | AUX 12V Power 2 | P6 | HDR-1X2/2.54 | 1 |
34 | Dynamixel 1 | H1 | DIP-1X4P-2.54MM-M | 1 |
35 | Dynamixel 2 | H2 | DIP-1X4P-2.54MM-M | 1 |
36 | ARDUINO-MEGAPRO-5V | U1 | ARDUINO_MEGA-PRO-5V | 1 |
Unfold
Loading...
Do you need to add this project to the album?