© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD JTAG Wiggler buffered adapter
License: GPL 3.0
Mode: Editors' pick
This type of cable is a bit more complicated than the unbuffered one, although it is also fairly easy to construct. The cable most often used in this category is the so-called Wiggler cable. The Wiggler is a commercial cable sold by Macraigor Systems. With a list price of $150 USD they are not cheap. There is a schematic on the internet that is commonly accepted to be the equivalent of what's inside a Wiggler cable. This schematic, by Alec, was drawn up for devices that implement a typical EJTAG header in devices based on the ADM5120 System-on-Chip, another design based on the MIPS32 architecture. The ADM5120 has support for EJTAG v2.6, which does not support DMA transfers.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 100pF | C1 | RAD-0.1 | 1 |
2 | SN74HC244N | U1 | DIP-20_L26.8-W6.4-P2.54-LS7.6-BL | 1 |
3 | 2N3904 | Q1 | TO-92-3_L5.1-W4.1-P1.27-L | 1 |
4 | 100 | R1,R2,R3,R4,R5,R6,R9,R10,R11,R12,R13 | RTH025W | 11 |
5 | 47K | R7 | RTH025W | 1 |
6 | 10K | R8 | RTH025W | 1 |
7 | 2.2K | R14,R15,R16,R17 | RTH025W | 4 |
8 | 1K | R18 | RTH025W | 1 |
9 | JTAG 14 PIN | J1 | PINSHRD_PTH_2X07 | 1 |
10 | DS1037-25MNAKT74-0CC | DSUB2 | DSUB-TH_DS1037-25MNAKT74-0CC | 1 |
Unfold
Loading...
Do you need to add this project to the album?