CC-BY-NC-SA 3.0
The schematic is based on using an Arduino Nano. In the breadboard prototype (see picture) an Arduino Ethernet Ten(Freetronics) has been used.The GPS receiver is a Neo6M Module.
ID | Value | Qty. | Components |
---|---|---|---|
1 | CD4511BE | 1 | U1 |
2 | IEE1801R 7-SEGMENT | 4 | U2,U3,U4,U5 |
3 | 100R | 7 | R1,R11,R12,R13,R14,R15,R16 |
4 | BC547 | 6 | Q1,Q2,Q3,Q4,Q5,Q6 |
5 | 560 | 4 | R2,R3,R4,R5 |
6 | Arduino Nano V3.0 | 1 | U6 |
7 | GY-NEO6MV2 | 1 | U7 |
8 | 7805 | 1 | U8 |
9 | BC9VPC | 1 | BAT1 |
10 | 1N4001 | 1 | D1 |
11 | LED | 4 | D2,D3,D4,D5 |
12 | 1K | 1 | R6 |
13 | 270 | 2 | R7,R8 |
14 | 1u | 6 | C1,C2,C3,C6,C8,C11 |
15 | 4.7k | 1 | R9 |
16 | 10k | 1 | R10 |
17 | 10n | 4 | C4,C7,C9,C10 |
18 | 100p | 1 | C5 |
Comments (0)