One channel of a moving magnet phono cartridge preamp with very accurate conformance to the RIAA qualisation curve, based on the design shown in Fig 16 of: http://www.ti.com/lit/an/slyt145/slyt145.pdf but with the addition of R10 and C8 to remove severe HF peaking in V(BUF) at >100kHz due to capacitive loading of U1 by the input of the bandpass filter implemented by U3. Fork the project and then press CTRL+R to run the simulation. Set one and only one of the 'ac' (frequency domain analysis) or 'tran' (time domain analysis) spice directives to have 'text type = spice' in right hand panel. Note that the time domain plot takes some time to settle into steady state due to frequency response of the amplifier.