© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Luciferin Dual MQTT Controller
License: MIT
Mode: Editors' pick
- 0
Update time：
2021-06-20 18:59:06
Creation time：
2021-05-28 19:54:40
Description
This controller is for the Luciferin Glowworm setup.
It's built for a two monitor setup with two esp8266 which share the same board. The LED strips have to be connected in parallel with the board, so they can benefit from the build in circuit stabilization on the board. The configured Gloworm Pin has to be pin 5, because that pin is connected to the logic level shifter.
This board is for the MQTT usage only, so keep in mind to flash the full Glowworm firmare and never connect usb and the power connection blocks of the board at the same time!
Find all information about Luciferin and Glowworm on https://github.com/sblantipodi/firefly_luciferin
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | CONN-TH_2P-P5.00 | P1,P2 | CONN-TH_2P-P5.00 | 2 |
| 2 | esp8266 | U1,U2 | D1 MINI | 2 |
| 3 | 1500uF | C2 | CAP-TH_BD10.0-P5.00-D1.0-FD | 1 |
| 4 | 74AHCT125N | IC1 | DIP14_TOMI_911 | 1 |
| 5 | 220R | R2,R1 | RES-TH_BD5.0-L15.5-P19.50-D0.7 | 2 |
Unfold
Project Members
0
0
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?