© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Modernization Module
Mode: Editors' pick
I am attempting to add some modern day creature comforts to my 1965 chevelle (auto headlights, acc stay on after key is taken out, lights left on chime, etc.). there will be two boards: the main board (sheet 1) and a board with fuses (sheet 2) that will be mounted a bit higher so the fuses will protrude thru the case and will be connected via wires from Pads on each board. a third board will also be used but that is simply an aftermarket amplifier for the speker output.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | ICS-28P | SK2 | DIP-28_L16.8-W10.1-P2.54-LS7.62-BL | 1 |
2 | HF3FD-012-ZSTF | K1 | RELAY-TH_HF3FD-XXX-XXX | 1 |
3 | B3B-XH-2 (LF)(SN) | CN2 | CONN-TH_B3B-XH-2 (LF)(SN) | 1 |
4 | 100nF | C1 | C0805 | 1 |
5 | SOT-23-6 | U3,U4,U5,U6 | SOT-23-6 | 4 |
6 | L7805ACD2T-TR | U1 | TO-263-2_L10.0-W9.1-P5.08-LS15.2-TL | 1 |
7 | 10K | R1,R3,R4,R5 | R0805 | 4 |
8 | 16MHz | X1 | OSC-SMD_4P-L3.2-W2.5-BL | 1 |
9 | 4.7uF | C3,C4 | C0805 | 2 |
10 | PMPB15XP | Q1,Q2,Q3 | DFN2020MD-6_L2.0-W2.0-P0.65-BL | 3 |
11 | Pad | P1,P2,P3,P4,P5,P6,P7,P8 | WPAD | 8 |
12 | Molex_0039301100_2x5_RA | H1 | MOLEX_MINIFIT-JR-5569-10A2_2X05X4.20MM_ANGLED | 1 |
13 | 1N4001G | D1 | SMA_L4.4-W2.6-LS5.0-RD | 1 |
14 | 330nF | C2 | C0805 | 1 |
15 | 39301060 | CN1 | CONN-TN_39301060 | 1 |
16 | 100 | R2 | R0805 | 1 |
17 | B2B-XH-A-GU | U2 | CONN-TH_B2B-XH-A-GU | 1 |
Unfold
Loading...
Do you need to add this project to the album?