© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Alarm Clock
Mode: Editors' pick
Circuit1.0
Open in EditorCircuit1.1
Open in EditorCircuit1.2
Open in EditorCircuit1.3
Open in EditorCircuit1.4
Open in EditorCircuit1.5
Open in EditorCircuit1.6
Open in EditorCircuit1.7
Open in EditorAsBuilt1.0
Open in EditorAsBuilt1.1
Open in EditorAsBuilt1.2
Open in EditorAsBuilt1.3
Open in EditorByte Blaster To JTAG
Open in EditorBlocking Relay From CB
Open in EditorID | Name | Designator | Quantity |
---|---|---|---|
1 | SIP4 | USB1 | 1 |
2 | TP4056 TE420 breakout | U1 | 1 |
3 | 3.7 | V1 | 1 |
4 | LM7805EE | U2 | 1 |
5 | Ardunio Nano | AR1 | 1 |
6 | Charge/Protection Board | U1 | 1 |
7 | 3.7V | V1 | 1 |
8 | USB | C1,J1 | 2 |
9 | DS3231 RTC | I1 | 1 |
10 | 4 Digit TM1637 | D1 | 1 |
11 | Buzzer | B1 | 1 |
12 | WS2812 Light Strip | L1 | 1 |
13 | 100-1000uF | C1 | 1 |
14 | 330 | R1 | 1 |
15 | USB | J1,J2 | 2 |
16 | 180 | R2 | 1 |
17 | Charge LED (Red) | LED1 | 1 |
18 | Charging LED (Red) | LED1 | 1 |
19 | Charged LED (Green) | LED2 | 1 |
20 | 10k | R2 | 1 |
21 | 510uF | C1 | 1 |
22 | P/M Switch | SW1,SW2,SW3,SW4,SW5,SW6 | 6 |
23 | 5V RELAY | U2 | 1 |
24 | 4.7k | R3,R4 | 2 |
25 | Boost Converter | U3,U2 | 2 |
26 | Switch | SW1,SW2,SW3,SW4,SW5 | 5 |
27 | Byte Blaster End (Male) | P1 | 1 |
28 | JTAG/CIB End (Female) | P2 | 1 |
29 | 2R33.09.1-TB5 | 2 | 1 |
30 | 2R33.09.1-TB2 | 5,7 | 2 |
31 | +B36.X2 | 12,14 | 2 |
32 | C20.15.X6 | 25,26 | 2 |
33 | FL210-A-P-S Open Command | SLI125CR | 1 |
34 | Lane 2 | SLO24CRA | 1 |
35 | Positive Terminal Block | 24VDC | 1 |
36 | Dold MK7850/200 | TIMER | 1 |
37 | a | 110VTO24VDCPSU | 1 |
Unfold
Loading...
Do you need to add this project to the album?