Schematic Design Software： The Easyeda Schematic Design Software is just as easy to use as EasyEDA PCB Layout Software .Both having the same Interface ,after having learned one ,matering the other one takes no time at all .Here is how simple to draw a schematic with EasyEDA . Step1: Select the component : Begin the schematic by placing the component . Select the parts from the Easyeda Libs Dialog Box .EasyEDA includes a large library with hundreds of component symbols.(ICS,resistors ,capacitors ,inductors, connetors....)that you can use to draw your electronic circuits. Step2： Position the component: Drag each component to the desired location on the schematic Interface .The Snap to grid feature make it easy to neatly align the symbols .If all the symbols do not fit on a single page ,add additional sheets . All the sheets of a schematic are linked together and save in one file . Step3: Add the wires : Now draw the wires to connect the parts together .Add each wire by clicking on a components pin , then drag the wire to the pin it connects to . Step4: Edit the Schematic – Making changes to a schematic is simple using standard commands such as Copy, Cut and Paste. Rearranging the components is easy by dragging them with the mouse. Press “Ctrl+C” to copy the file to the other Schematic Interface . Step5: Link the Schematic and PCB – After you complete your schematic, it can be linked to your circuit board layout file. You convert the schematic file to PCB and begin to layout PCB board .The image below is the file converted from schematic .When the package in schematic has been changed , click”import changes ”to refresh the components in the PCB .