© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD LM13700 Dual VCA
License: MIT
Mode: Editors' pick
The project includes an implementation of a schematic for the LM13700 OTA in a Voltage Controlled Amplified configuration. Based on the article "Understanding and Using 'OTA' Op-Amp ICs : Part 2 by Ray Marston - 11th of May 2003" from the Nuts & Volts magazine. Full details in the article nutsvolts.com/uploads/magazine_downloads/11/May%202003%20Ray%20Marston%20-%20Understanding%20And%20Using%20OTA%20OP-Amps.pdf
A compact LM13700 PCB with a Eurorack-style connector as well as a Frontpanel PCB are also part of this project.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | R_3386P_EU | ADJ_A,ADJ_B | RES-ADJ-TH_3362P | 2 |
2 | 0.1u | C1,C2 | 2.5MM CERAMIC CAP | 2 |
3 | CV-B | J1 | HDR-M-2.54_1X1 | 1 |
4 | CV-A | J2 | HDR-M-2.54_1X1 | 1 |
5 | IN-A | J3 | HDR-M-2.54_1X1 | 1 |
6 | IN-B | J4 | HDR-M-2.54_1X1 | 1 |
7 | GND | J5,J6 | HDR-M-2.54_1X1 | 2 |
8 | OUT-A | J7 | HDR-M-2.54_1X1 | 1 |
9 | OUT-B | J8 | HDR-M-2.54_1X1 | 1 |
10 | HDR-IDC-2.54-2X5P | P1 | IDC-TH_10P-P2.54_C5665 | 1 |
11 | 10k | R1,R2,R3,R4 | R_AXIAL-0.4 | 4 |
12 | 0 | R5,R6,R7,R8 | R_AXIAL-0.4 | 4 |
13 | 22k | R9,R10 | R_AXIAL-0.4 | 2 |
14 | LM13700 | U1 | DIL-16 | 1 |
Unfold
Loading...
Do you need to add this project to the album?