This is a almost exact copy of the TP4056. The only difference is that this board has a better protection IC. Basicly it has a better protection sistem.
The TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery the module also provides necessary protection required by...
This is a battery capacity indicator for 3.7V lithium ion batteries, using a bi-color LED (red-green) common cathode.
When the battery is from 100% to 50%, the LED stays green. When the capacity is from 50% to 20%, both LEDs turn on so it shows as yellow. When battery drops below 20% the green LED turns off leaving the red LED turned on.
It uses a schmitt trigger for both LEDs to prevent bou...
This is the second version of my TP4056 based lithium battery charger module.
In v1.xx i used a linear voltage regulator (LM7805CV) which got very hot and limited the potential of the module a lot.
In v2.10 i replaced LM7805 with a switching counterpart (XL2011) which resolves most of the input issues allowing for a full range of 5V (via USB) and from 8-45V via the screw terminal or DC-Jack.