![enter image description here]
The circuit and PCB have been produced and tested and basic code is available on github. See the project site on hackaday.io for more information about the project.
# Geoff’s Micro Bridge #
**USB to Serial Bridge and USB PIC32 Programmer**
**CAUTION! UNTESTED – WORK IN PROGRESS – UNDER CONSTRUCTION**
The Microbridge has two operating modes:
- USB to Serial converter mode using the TTLSerial interface.
- PIC32 programming mode using the PIC32 ICSP interface.
The Mode switch is used to change modes and the LED is used to indicate the current operating mod...
Friendly Ardiuno'Like Board with 32Bit PIC32MX supported
with 3.3V&5V sources.Also,I wrote some usefull libiraries.
Khudaydus's TFT SPI Library
Built-in SD-CARD + Library
Voltage Level circuit 3.3V 5V (suppots SPI)
Khudaydus's Keyborad/PS2 playstaion joystick/Bluetooth Libraries.
It could be programmed with MikroC + My Libraries mentioned above (^.^)
the 8bit/4bit lines TFT is converted to SPI based on PIC18-44pin uC. The chip has been embedded with many functions that could be run via Khudaydus protocal paked via SPI.It can do : (1) create windows (2) Support text editor in addition with some common Emojies(^.^) (3) create text/edit box,eg. to accept command lines from user. (4) Video-Streaming is most important part to use the TFT with Camer...
Long Term personal project to build an arcade machine using the FTDI Eve Graphics Processor and my favourite PIC32 processor. Relay is for switching on the monitor, LED outputs for cabinet lighting and 3W on board amplifier. Will connect to large VGA monitor and go inside a big wooden arcade cabinet. Then looking forward to a year or two to write my favourite game from the 80's :-)