My version of Big Clives PCB.
Width changed to 20mm to suite JLCPCB's minimum dimention for panal by V groove.
Panaled 10 per board so you will get 50 of them for your $2 :)
Minor correction to Clives board so that the 1 meg resistor is in the same place as shown in Clives schematic.
Big Clive build video https://youtu.be/cL4h2gNFJeY
As the title, LED dimmer. Tired or turing on lights at night just to get blinded by being so bright. This is a small LED dimmer that can be put beside your bed at night table or just stuck to the bed it self.Allows gradual ON and OFF dimming or full ON.
Learning from version 1, version 2 changessecond channel from low to high FET PWM current directly controlled by input ie PIR/motion sensor to. Ad...
This is a simple circuit which controlls a relay with both LDR and PIR technology. you can supply 12v AC by connecting a 12v transformer to the 2 pinned **SCREW** header.If you dont have a transformer, you can directly connect a 6v battery to power this through the **'+DC6V' header**.
The LDR mode turns ON the relay when it's dark while the PIR mode turns ON the relay when theres a motion within...
Uses 328PU to turn off light or turn on as needed, Using much software. But it has micro wave detection, pir detection, audio detection, and light detection.