This project presents the implementation of a water meter based on ST microcontroller STM32F103. This project allows you to take into account the resources used and transfer data to the user's phone or website via the GPRS or Bluetooth channel. It is also possible to implement Bluetooth data exchange between the device and the user's smartphone and using the LoRa network for integration into the s...
Water detector with 4 level stages. Each stage makes the 555 timer to give a supply period for the buzzer. The active buzzer transmits sound with a pause period between 0.5-3 seconds, depending on the level detected.
This is a simple circuit powered by a 741opamp. The relay does the switching of the pump or adapter of the water pump. It's a 230V/12V switching relay. Here you can find the schematic and the PCB layout also.
I am only a beginner at this. So would be very happy for anyone to point out problem with the
design. This would be very helpful.
The unit is design to be connected to 7 float similar to the one in the image,(attach file)
on the block Bottom right.
As the water rises the LED bar on the left indicates the level. Power & Buzzer indicator.
With the rotary switch top right to can set t...