This projects is a device controlled thru i2C, it has a set of instructions to control two leds, two buzzers and a combination of them.
The device uses an ATTiny85 and it connects to an RaspberryPi to send the commands.
The instruction for the device are:
- 0x00 --> Does nothing
- 0x01 --> All Buzzers ON, All LEDs OFF
- 0x10 --> Al Buzzers OFF, All LEDs ON
- 0x11 --> All Buzzers ON, All LEDs O...
Water detector with 4 level stages. Each stage makes the 555 timer to give a supply period for the buzzer. The active buzzer transmits sound with a pause period between 0.5-3 seconds, depending on the level detected.
I am only a beginner at this. So would be very happy for anyone to point out problem with the
design. This would be very helpful.
The unit is design to be connected to 7 float similar to the one in the image,(attach file)
on the block Bottom right.
As the water rises the LED bar on the left indicates the level. Power & Buzzer indicator.
With the rotary switch top right to can set t...