LiPo battery charger and 5V booster based on the IP5306.
- switch-mode charging with up to 2.1A / 91% efficiency
- discharging with up to 2.4A
- boost converter with up to 92% efficiency
Solar powered switch-mode charger (CN3801), protector (HY2112) and 5V booster (MT3608) for LiFePO4 batteries.
The charger provides maximum power point tracking (MPPT) and can easily be modified to work with LiPo batteries.
WARNING Overvoltage-Reverse voltage protection with PTC and diode, Overcurrent Protection with PTC U2-U3.
Overdischarge protection with microcontoller.
Wrong setting may cause Injury or Overheating.
Overheating + Battery = Acidic gas + Fire + Expolosion. Only for indoor and well ventilated areas.
Produce at your Own Risk
12 to 15 volt step up converter,12V lead acid battery charger, output voltag...
The attached circuit is a 12V to 24V battery charger, originally designed for charging a 24V mobility scooter from a car 12V outlet. It has boost charge and trickle charge control, and can deliver upto 3A. It can be modified to deliver higher current by upgrading the MOSFET.
The PCB is designed to fit an Evatron REAS80 Extruded Aluminium Enclosure 80x64x30mm (Order Code: 30-3555 www.rapidonline.c...