Simple Z80 test design - single board with all the basics and a few luxuries. The board has many more options than it really needs so that I can experiment. All devices are through-hole to make the build easy for those of us yet to venture into SMD. Influences for this project include the RC2014 512K RAM/Flash card and the SIO/2 card along with bits and pieces from all over the Internet that I've...
This is a CP/M 2.2 computer (pre-IBM). It is working.
It is unique in that it uses the the SIM/RIM instructions and SID/SOD/RST6.5 pins for Serial IO. It uses a 5V USB serial adapter for power and communication to your computer (using a serial terminal program).
There two problems with this approach in that the processing delays between Serial IO means that character can be missed if data is sen...
V2 of my ZTO-80 SBC project, with the end goal of having color graphics(?) along with a BASIC interpreter based off of NASCOM BASIC. A future revision may include support for CP/M.
Feel free to clone this project. Just be sure to acknowledge me as printed below:
Copyright Jacob Hahn 2019.
This documentation describes Open Hardware and is licensed under the
CERN OHL v. 1.2.
You may redistribute a...
ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
At the core of this module is the ESP32-D0WDQ6 chip*. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individu...