PCB muon detector
** CHECK v2 HERE: https://easyeda.com/markus_jidoka/muon-detector **
** Special Thanks to [markus_jidoka](https://easyeda.com/markus_jidoka) due to the nice improvements **
Schematics designed by Robert Hart:
Thanks to Robert Hart for his fantastic ideas, please check his site for further experiments:
# Overview #
The [MuonPi Project](http://muonpi.org) utilizes an inexpensive Raspberry Pi B+ plug-on module for particle and nuclear physics detectors aimed for measuring muons from atmospheric showers triggered by high energetic cosmic particles. The goal is to set up a distributed network of these detector stations in order to determine the energy, timing, and eventually the origin of the primar...
Water detector with 4 level stages. Each stage makes the 555 timer to give a supply period for the buzzer. The active buzzer transmits sound with a pause period between 0.5-3 seconds, depending on the level detected.
I am only a beginner at this. So would be very happy for anyone to point out problem with the
design. This would be very helpful.
The unit is design to be connected to 7 float similar to the one in the image,(attach file)
on the block Bottom right.
As the water rises the LED bar on the left indicates the level. Power & Buzzer indicator.
With the rotary switch top right to can set t...