RV2: Fuzz output volume
AUDIO1: 6.35mm in
AUDIO2: 6.35mm out
DC1: 9V master power
DC2: 48V phantom power
LED1: Master power indicator
LED2: Phantom power indicator
H1: Left channel fuzz bypass (disconnect H3 if connected)
H2: Right channel fuzz bypass (disconnect H3 if connected)
H3: Fuzz power
H4: Left channel wah bypass (disconnect H6 if connected)
H5: Right channel wah...
A good overdrive for guitar and bass created by Beavis Audio. Schematic is based on the Electra Distortion. Transistor used is russian silicon KT312, you can find these on Ebay at very low price. If you don't have KT312, you can still use small NPN silicon like 2N2222 or 2N3904 (mind the pinout in this case), still the russian part sounds a lot better to my opinion... Maybe due to the mojo :)
A breadboard-compatible dual non-inverter audio amp built around an opamp.
Exposes most of its internals on pins for more versatility (variable gain, simple filter, ...). Some parts are optional.
Can be stacked to create a mixer with 1 board per stereo channel and 1 board for a master volume.
Попытка сделать гитарный дисторшн на операционном усилителе TDA2030/50 и 2-х транзисторах 2n5551.
Большой диапазон питающих напряжений (9 - 35 V DC)
Картинка во вложении - разводка платы (зеркалить не нужно).
Размеры платы (картинка во вложении): 53 x 49 мм