A ESP-12 IoT controller for RGB LED Stripe 5-12V.
3+1 channels through MOSFET, PWM and dimming functionality.
The MOSFETs can be replaced by NPN Power transistors (input resistors are as THT parts placed, the 10k pull down's not needed.
The 4th channel is a Logic level up-converter (3.3V->5V). Driven by a 2N7002, can be replaced with BSS138 or similar. Note that it's is a very small power output...
Home air monitor is based on the development board NodeMCU (CP2102 version). It includes a temperature sensor - ds18b20, a humidity sensor - HTU21D, a carbon dioxide sensor MNH-Z19. It is also possible to connect one more i2c sensor and a radio module to 433 MHz.
# Wifi Modem ESP8266 - ESP-01 #
**for Retro Computer**
Simulates the old-style Hayes "AT" commands, so that the ESP8266 appears to the terminal as if it were a Hayes modem. These "AT" commands may then be issued to the ESP8266 in order to force it to connect to a wireless access point, and from there to make one or more manageable connections to the internet. It also includes...
3 Channel (RGB) 10A/chan, WeMos LED Driver 12-24V
Specifically designed for 24V RGB LED strips
Designed to be DIN Rail mounted in a small enclosure next to a 24V power supply for use for larger home LED installations (under cabinet, Decks, etc)
Hosts a webpage to interface to change colors from a smart phone.
rx/tx and I2C broken out for external interfacing specifically a for nextion display...