I made this schematic for the Arduino Nano 3.2 to be as close as possible to the official schematic found [here](https://www.arduino.cc/en/uploads/Main/Arduino_Nano-Rev3.2-SCH.pdf). I chose similar components as on the official Nano. This does mean the schematic is a bit weird, as the resistors, for example, are merged into resistor arrays, meaning I had to make some jumps to the arrays. The PCB d...
ATtiny85 IR remote LED controller - mainly for ambient light behind a TV
Single colour LED
On first power up
Press PROG button to enter program mode
Programming can be over written once the PROG button is pressed
Press ON/OFF assigned button
LED fades in to set brightness value
Default to 50% 
Once the di...