**555 timer based PWM LED dimmer**
This project uses PWM to turn on and off a LED (or a strip of them) really fast and changes the duty cycle (Fig.1) so that the human brain perceive it as the dimming of the LED(s). This means that the MOSFET doesn’t have to drop large amount of voltage, this makes the device very energy efficient.
LED Music Spectrum generates the beautiful lighting pattern according to the intensity of music. It contains many RGB LEDs which not only turns on and off as per the music but also change color according to the music.
Here is a Music Spectrum using NeoPixel RGB LED Matrix and ARM microcontroller.
<iframe width="560" height="315" src="https://www.youtube.com/embed/K0kpb31bLfU" frameborder="0"...
ATtiny85 IR remote LED controller - mainly for ambient light behind a TV
Single colour LED
On first power up
Press PROG button to enter program mode
Programming can be over written once the PROG button is pressed
Press ON/OFF assigned button
LED fades in to set brightness value
Default to 50% 
Once the di...
**tiny LED's spot for Luciole's modules**
It's a set of 17 RGB LEDs close enough to each others to produce powerfull light. This module can be used naked or with basics controllers.
*You can use it as ambiant light, light or as a decoration * _(but take into consideration that it is not sufficient to be used as a proper room light)._
To know more, go on my [Github page](https://github.com/Weld...
IR RBG LED Strip Arduino Controller
Full build and instructions on [Youtube Video] or [Instructables.com]
As title says, 2 very simple PCBs with schematics
schottky diode and capacitor (ceramic / electrolytic doesn't matter) is part of smoothing and can be skipped for standard LED's, but it's needed e.g for self changing color ones