Universal board for Arduino Nano and UNO and Nano shield with NRF24L01 transmitter, 16x02 LCD I2C SPI (PCF8574) display, two KY-040 Rotary Encoder, GY-521 ITG/MPU (MPU6050), Adafruit 9DOF (LSM303DLHC+L3GD20), MH-FMD BUZZER, DHT11 Humidity & Temperature Sensor, BME280 Pressure Humidity Temperature Sensor Module, MQ-8 and MQ-9 GAS SENSOR, With additional areas for dip and soic.
This is an arduino nano based soldering station. **Tested, working version.**
-Designed to work with rotary encoders.
-Built in Beeper.
-Built in memory buttons to store often used temperature values.
-Built in Debounceing for the buttons. (up to 7 buttons, built in 3 buttons)
-Designed to work with a MAX6675 module for temperature readings from a K-type thermocouple.
-Built in LCD head...
I made this schematic for the Arduino Nano 3.2 to be as close as possible to the official schematic found [here](https://www.arduino.cc/en/uploads/Main/Arduino_Nano-Rev3.2-SCH.pdf). I chose similar components as on the official Nano. This does mean the schematic is a bit weird, as the resistors, for example, are merged into resistor arrays, meaning I had to make some jumps to the arrays. The PCB d...
THIS IS A SIMPLE ARDUINO IR HOME AUTOMATION SYSTEM IN WHICH IT CAN ACTIVATE OR DEACTIVATE 2 RELAYS INDUVIDUALLY OR SEPERATELY.
THE IR REMOTE USED FOR THIS PROJECT HAS A RANGE OF 8m BUT THE NAME AND DETAILS ARE NOT SPECIFIED. SO I FOUND A PICTURE OF IT ON THE INTERNET SO U CAN SEE WHICH ONE IT IS [IR REMOTE FOR ARDUINO](https://www.google.com/search?q=arduino+ir+remote&source=lnms&tbm=isch&sa=X&ve...
Original source from : [https://easyeda.com/berger.xavier/solarsaver](https://easyeda.com/berger.xavier/solarsaver)
**Open Solar Energy Diverter**
This project have the aim to divert not comsumed electricity produced by photovoltaic panel to water heater to keep energy produced in the area of usage.
This project is base on idea from [http://energie-autrement.blogspot.com/p/plans-eolienne.html]...