Grove - Gas Sensor(MQ3)
![enter image description here][1]
**DESCRIPTION**
How to choose a gas sensor ?
The Grove - Gas Sensor module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, somke and so on. Measurements can be taken as soon as possible based on its fast response time. Also the sensitivity can be adjusted by the potentiometer.
There...
Grove - Barometer (High-Accuracy)
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
This Grove - Barometer (High-Accuracy) Sensor features a HP206C high-accuracy chip to detect barometric pressure ,Altimeter and temperature. It can widely measure pressure ranging from 300mbar~1200mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolutio...
Grove - Temperature&Humidity Sensor (HDC1000)
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
Grove - Temperature&Humidity Sensor (HDC1000) utilizes a HDC1000 sensor, which was designed by Texas Instruments. It is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidi...
Grove - Temperature Sensor
![enter image description here][1]
**DESCRIPTION**
Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alters the output of a voltage divider which is measured by an analog input pin and converted to a temperature value. The operating range is -40 to 125°C , with an accuracy of 1...
Grove - HCHO Sensor
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
How to choose a gas sensor ?
The Grove - HCHO Sensor is a semiconductor VOC gas sensor. Its design is based on WSP2110 whose conductivity changes with the concentration of VOC gas in air. Through the circuit, the conductivity can be converted to output signal that co...
Grove - Flame Sensor
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor...
Grove - I2C Color Sensor
![enter image description here][1]
**DESCRIPTION**
The video shows how to recognize different colors with the sensor and then to drive the lamp lighting in blue, green, yellow, orange and red accordingly.
This module is based on the color sensor TCS3414CS with digital output I2C. Based on the 8*2 array of filtered photodiodes and 16-bits analog-to-digital converters, you can gain the co...
Grove - Luminance Sensor
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
Grove - Luminance Sensor using APDS-9002 as lumens Sensor, provide the linear transform lumen intensity for the output voltage levels. And APDS-9002 spectrum and human eye is extremely close to. Very suitable for application in the field of human intelligence.
**Spe...
Grove - Sound Sensor
![enter image description here][1]
**DESCRIPTION**
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.
**Features**
Grove compatible interface
Wide supply voltage range: 4V-12V
Low quiescent current drain:...
Grove - Digital Light Sensor
![enter image description here][1]
**DESCRIPTION**
This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.
You can switch betw...
Grove - Loudness Sensor
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Based on amplifier LM2904 and a built-in microphone, it amplifies and filters the high frequency signal that received from the microphone, and outputs a positive envelop. This will mak...
Grove - FM Receiver
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
Grove - FM Receiver is a wideband FM receiver module,this module is base on SX6119,it can offers true single-chip voice FM receiver,which is built-in amplifier,VCO,filter and demodulator. The multifunction button provides greater convenience for users to control.
**...
Grove - I2C FM Receiver
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
![enter image description here][4]
**DESCRIPTION**
Grove - I2C FM Receiver is a wideband FM receiver module,this module is base on RDA5807M,The RDA5807M series is the newest generation single-chip broadcast FM stereo radio tuner with fully integrated synthesizer, The RDA5807M series ha...
Grove - 3-Axis Digital Gyro
![enter image description here][1]
**DESCRIPTION**
Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes.
**Features**
Grove compatible interface
Digital-output X-, Y-, and Z-Axis...
Grove - 6-Axis Accelerometer&Compass v2.0
![enter image description here][1]
![enter image description here][2]
![enter image description here][3]
**DESCRIPTION**
The Grove 6 – Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output. It can be used easy with micro controller via I2C or SPI port.
This sensor can be configured to generate an interrupt signal for free-fall,...
Grove - 3-Axis Digital Accelerometer(16g)
![enter image description here][1]
**DESCRIPTION**
Based on the excellent ADXL-345, this digital 3-axis accelerometer has excellent EMI protection. Its variable output makes it suitable for a wide range of applications:
HDD shock protection
Vibration sensor
Game controller input
Robotics
Smart vehicles
Anywhere you need to obtain motion-sensing & orientation information.
The excellen...
- Policy terms
- Legal
- Privacy
- Contribute
- Thanks
- Help
- Forum
- Tutorial
- Contact Us
- About
- About Team
- News Report
你现在访问的是EasyEDA海外版，使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.