License

Custom Circuit Board for DIY Quadcopter

1 year ago 2591
  • Description
  • Documents
  • BOM
  • Attachments
  • Members
  • Comments

Description

In this project, I will go through the process of designing and making a flight controller board from scratch for a micro-quadcopter. This board will be based on the ATMega328 microcontroller and will be used to control four coreless DC motors. The whole PCB making process from designing of the schematic to custom circuit board is done using EasyEDA. If you are interested in the circuit project, you could access the circuit project for the micro-quadcopter board. enter image description here

Step 1: Designing the schematic The schematic designing process was very smooth and intuitive on the EasyEDA environment. Anyone with previous experience in other circuit design tools would easily adapt to it. I found it much more preferable than dealing with messy etchant used for making home-brew PCBs. The circuit schematic is as image showed and could be edited Here: https://easyeda.com/editor#id=d26e0216b68649e0b102da0a51664bef enter image description here

Step 2: Designing the PCB Using the Convert To PCB option the blank PCB and component footprints were generated. All the component footprints used were available in the EasyEDA Component Library. In case you cannot find the component, EasyEDA also has a handy custom component creating tool. The PCB outline, dimensions, hole dimensions, silk screen color can all be customized using the useful right-hand side menu on the screen. Screenshots of the PCB design screen below and can be edited Here: https://easyeda.com/editor#id=b6e2e30d14264213aea6a2ebbdde2108 enter image description hereenter image description here

Step 3: Custom circuit board for the Quadcopter Once the PCB was designed and finalized, you can finalize the number of copper layers you need, the PCB thickness, copper weight, and even the PCB color from the checkout menu. There is also a handy option of downloading your Gerber File on the PCB order page as the screenshot showed and seeing the Photo View of your PCB (i.e. how it will turn out). I just spent 6 days to receive PCBs after I custom circuit board on EasyEDA. enter image description hereenter image description here

Step 4: Prepare compents for the Quadcopter The main components used in board for the micro-quadcopter: · Quadcopter board from EasyEDA · ATMega328 TQFP32 Package with 16MHz Crystal x 1 · Si2302 MOSFETs x 4 · 78L33 LDO Voltage Regulator x 1 · NRF24L01 Transceiver Module x 1 · MPU6050 Acc/Gyro Module x 1 · Coreless Motors x 4 The main idea while designing the flight controller board was to keep it small, lightweight while still making it easy enough to solder at home. Therefore I chose to use as many SMD components as was feasible to solder. The ATMega328 chip and MOSFETs are the SMD components used on this board. Though in hindsight I have also used 1206 SMD resistors and capacitors as they are easy to solder even for hobbyists. enter image description here

Step 5: Soldering and Final Build After all components on boards is soldered and the quadcopter is well built, I can quickly go on to the coding and testing of the project. I have included some pictures of the final quadcopter build that I made using these boards. Also, I have included a picture comparing a home-made board to a professionally made PCB and you can see the improvement in quality. Hope you will enjoy this project. enter image description hereenter image description here

Documents

v1PCB

BOM

None

Attachments

None

Members / Participants(1)

Success
The owner does not allow comments in this project now

Comments (0)

goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user 立创EDAlogo 双贱