Operating voltage: 1.8V ~ 3.6V (recommended 3.3V)
Maximum transmission rate: 500kbps,
Support for 2-FSK, GFSK and MSK modulation.
Rate, power and frequency can be modified with software
High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
Built-in hardware CRC error detection, and address control
Programmable control of output power, up to +10 dBm.
Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment.
Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
Fast frequency changes brought about by a suitable synthesizer frequency hopping system
Module can be software-based address, software programming is very convenient
2.54mm DIP spacing interfaces for embedded applications
Separate 64-byte RX and TX data FIFO
Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings