**BUG**
Concise problem statement:
In:
><https://easyeda.com/bbs_view_966.htm>
you suggest that to make an unplated mounting hole:
*Why not put a PAD or Via with pad size = hole size?*
I just tried to:
i) modify a pad to make pad size = hole size;
ii) create a new PCB lib hole with pad size = hole size.
I could not do it.
The minimum (pad-hole) size alway had to be 10mil.
I tried setting a track size of 0 in case it was the DRC that was preventing me from doing it but that does not work because the DRC does not allow a track width of 0.
What am I doing wrong?
Steps to reproduce bug:
1. Place default pad (60mil pad, 36mil hole);
2. Edit hole to 60mil;
3. Hole stays at 36mil;
4. Edit hole to 50mil;
5. Hole increases to 50mil;
6. Edit hole to 51mil;
7. Hole stays at 50mil;
Results: see above
Expected results: expect to be able to set hole size = pad size to make unplated hole with no pad.
Url:
Browser: Chrome on W7