**BUG**
Concise problem statement:
Doing:
>**CTRL+R**
to run the spice directive in the schematic:
>`ac dec 100 1Meg 1G`
does an AC Analysis correctly.
Doing:
>**Simulate > Run the Document > AC Analysis**
>`Type of sweep: Decade`
>`Number of points: 100`
>`Start frequency: 1Meg`
>`Stop frequency: 1G`
>**Run**
generates an error:
>`Start frequency should be less than stop frequency.`
>`The suffix Meg stands for Mega, m stands for milli`
Expected results:
Entering the same numbers in both ways to set up and run the simulation should work the same way.
There should be no error message.
Url:
https://easyeda.com/file_view_FM-Modulator_bc6oGASas.htm
Browser: Chrome on (W7)