Editor Version ×
Standard

1.Easy to use and quick to get started

2.The process supports design scales of 300 devices or 1000 pads

3.Supports simple circuit simulation

4.For students, teachers, creators

Profession

1.Brand new interactions and interfaces

2.Smooth support for design sizes of over 5,000 devices or 10,000 pads

3.More rigorous design constraints, more standardized processes

4.For enterprises, more professional users

Ongoing

STD TPS75918 Single Output LDO, 7.5A, Fixed(1.8V), Fast Transient Response, Low Quiescent Current

License:

Mode: Editors' pick

  • 1.1k
  • 0
  • 0
Update time: 2021-04-09 18:35:59
Creation time: 2015-11-21 13:59:10
Description
**Description** The TPS759xx family of 7.5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG)\ and an adjustable voltage option regulator. These devices are capable of supplying 7.5 A of output current with a dropout of 400 mV (TPS75933). Therefore, the devices are capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops below 10 µA when the devices are disabled. The TPS759xx is designed to have fast transient response for large load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 400 mV at an output current of 7.5 A for the TPS75933) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 µA over the full range of output current, 1 mA to 7.5 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. **Features** 7.5-A Low-Dropout Voltage Regulator Available in 1.5-V, 1.8-V, 2.5-V, and 3.3-V Fixed-Output and Adjustable Versions Open Drain Power-Good (PG)\ Status Output (Fixed Options Only) Dropout Voltage Typically 400 mV at 7.5 A (TPS75933) Low 125 µA Typical Quiescent Current Fast Transient Response 3% Tolerance Over Specified Conditions for Fixed-Output Versions Available in 5-Pin TO-220 and TO-263 Surface-Mount Packages Thermal Shutdown Protection
Design Drawing
schematic diagram
1 /
PCB
1 /
The preview image was not generated, please save it again in the editor.
ID Name Designator Footprint Quantity
1 TPS75918 U1 DIP 1
2 1u C1,C2 CP_8X13MM 2
3 1k R1 R3 1
4 SIP1 -PG HDR1X1 1
5 SIP3 P1 HDR1X3 1

Unfold

Project Attachments
Empty
Project Members
Related Projects
Change a batch
Loading...
Add to album ×

Loading...

reminder ×

Do you need to add this project to the album?

服务时间

周一至周五 9:00~18:00
  • 0755 - 2382 4495
  • 153 6159 2675

服务时间

周一至周五 9:00~18:00
  • 立创EDA微信号

    easyeda

  • QQ交流群

    664186054

  • 立创EDA公众号

    lceda-cn