Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is not supported at present. Please extend your EasyEDA usage duration and try again.
Editor Version×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD
TPS7A4501 Single Output LDO、1.5A、ADJ (1.21V to 20V)、Low-Noise、Fast-Transient Response
License:
Mode:Editors' pick
1.6k
0
0
0
Update time:
2021-04-07 07:21:14
Creation time:
2015-11-21 13:53:07
Description
**TPS7A4501 Description :**
The TPS7A45xx devices are low-dropout (LDO) regulators optimized for fast transient response. The device can supply 1.5 A of output current with a dropout voltage of 300 mV. Operating quiescent current is 1 mA, dropping to less than 1 µA in shutdown. Quiescent current is well controlled; it does not rise in dropout, as with many other regulators. In addition to fast transient response, the TPS7A45xx regulators have very low output noise, which makes them ideal for sensitive RF supply applications. Output voltage range is from 1.21 V to 20 V. The TPS7A45xx regulators are stable with output capacitors as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR, as is common with other regulators
TPS7A4501 Features:
*Optimized for Fast Transient Response
*Output Current: 1.5 A
*High Output Voltage Accuracy : 1% at 25°C
*Dropout Voltage: 300 mV
*Low Noise: 35 µVRMS (10 Hz to 100 kHz)
*High Ripple Rejection: 68 dB
*1-mA Quiescent Current
*No Protection Diodes Needed
*Controlled Quiescent Current in Dropout
*Fixed Output Voltages: 1.5 V, 1.8 V, 2.5 V, 3.3 V
*Adjustable Output from 1.21 V to 20 V
*Less Than 1-µA Quiescent Current in Shutdown
*Stable with 10-µF Output Capacitor
*Stable with Ceramic Capacitors
*Reverse-Battery Protection
*No Reverse Current
*Thermal Limiting
APPLICATIONS
*3.3-V to 2.5-V Logic Power Supplies
*Post Regulator for Switching Supplies
Forked project will be set private in personal workspace. Do you continue?
Clone
Project
The Pro editor is about to be opened to save as. Do you want to continue?
private message
Send message to gerrychen
Delete
Comment
Are you sure to delete the comment?
Report
TPS7A4501 Single Output LDO、1.5A、ADJ (1.21V to 20V)、Low-Noise、Fast-Transient Response
No Profile
Announcer: GerryChen
Creation time: 2015-11-21 13:53:07
Published time:
2021-04-07 07:21:14
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
*
Report type:
Please select report type
*
Report reason:
Please fill in the reason for your report and the content is 2-1000
words
*
Upload image:
+
Upload image
*
Email address:
Please fill in your email address
Report
Submitted successfully! The review result can be viewed in the personal
center, review notification.
Kind tips
Your EasyEDA usage duration is brief. In order to avoid advertising information, this action is
not supported at present. Please extend your EasyEDA usage duration and try again.
Share
Project
Copy
Copy
Scan the QR code and open it on the mobile terminal