MIT
Using GPS module uBlox NEO 6-M. Based on schematic and source code from here
ID | Value | Qty. | Package | Components |
---|---|---|---|---|
1 | ARDUINO NANO | 1 | ARDUINO_NANO | U1 |
2 | NEO-6M | 1 | NEO-6M_Module_PCB | U2 |
3 | 1k | 2 | AXIAL-0.3 | R1,R7 |
4 | 2.2k | 1 | AXIAL-0.3 | R2 |
5 | 3.9k | 1 | AXIAL-0.3 | R3 |
6 | 8.8k | 1 | AXIAL-0.3 | R4 |
7 | 270 | 1 | AXIAL-0.3 | R5 |
8 | 100n | 1 | RAD-0.1 | C1 |
9 | 220 | 1 | AXIAL-0.3 | R6 |
10 | RED | 1 | LED-3MM/2.54 | LED1 |
11 | 4.7u | 1 | RAD-0.1 | C2 |
12 | 100k | 2 | AXIAL-0.3 | R9,R10 |
13 | 1u | 1 | CAP-D3.0XF1.5 | C3 |
14 | 2N7000 | 1 | TO-92(TO-92-3) | Q1 |
15 | 10k | 1 | AXIAL-0.3 | R11 |
16 | Header-Male-2.54_1x5 | 1 | HDR-5X1/2.54 | P1 |
17 | 100K | 1 | RM065-V1 | PR1 |
18 | 3P-2.0-90D-REINFORCE; | 1 | SW5-2.0-8.8X4.4X4.7MM-90D | SW1 |
Comments (2)
Hi,
someone a tip for the SW1 switch? Couldn't found a adequate one on the net.
Thanks
Speedo
Way cool!!!
Definitely want to try this with my truck...simple handi-talky and send packets as I drive
Very neat design and setup...
73's
KF5CIF