CERN Open Hardware License
This Power Distribution Board allows you to plug everything you may need directly on the 3D printer tool head, converting all the messy cables into a single 14 poles flexible cable.
| ID | Name | Designator | Footprint | Quantity | BOM_Manufacturer Part |
|---|---|---|---|---|---|
| 1 | Heating_Cartridge | CN2 | CONN-TH_43045-0200 | 1 | 0430450200 |
| 2 | 30002-14A-T1P | CN1 | CONN-TH_30002-14A-T1P | 1 | 30002-14A-T1P |
| 3 | HotEnd Fan Header | CN4 | JST_XH_B03B-XH-A_03X2.50MM_STRAIGHT | 1 | JST_XH CONNECTOR |
| 4 | Probe Header | CN8 | JST_XH_B03B-XH-A_03X2.50MM_STRAIGHT | 1 | JST_XH CONNECTOR |
| 5 | Extra Pin Jumper | H3 | HEADER 3P STEEK 2.54MM | 1 | Header 3P 2.54mm |
| 6 | HotEnd fan voltage jumper | H1 | HEADER 3P STEEK 2.54MM | 1 | Header 3P 2.54mm |
| 7 | Data Jumper | H4 | HEADER 3P STEEK 2.54MM | 1 | Header 3P 2.54mm |
| 8 | Probe voltage jumper | H5 | HEADER 3P STEEK 2.54MM | 1 | Header 3P 2.54mm |
| 9 | Blower Fan voltage jumper | H2 | HEADER 3P STEEK 2.54MM | 1 | Header 3P 2.54mm |
| 10 | BLTouch Servo | CN7 | JST_XH_B02B-XH-A_02X2.50MM_STRAIGHT | 1 | XH_2P_CONNECTOR |
| 11 | Blower Fan Header 2 | CN6 | JST_XH_B02B-XH-A_02X2.50MM_STRAIGHT | 1 | XH_2P_CONNECTOR |
| 12 | Blower Fan Header 1 | CN5 | JST_XH_B02B-XH-A_02X2.50MM_STRAIGHT | 1 | XH_2P_CONNECTOR |
| 13 | LEDs | CN11 | JST_XH_B02B-XH-A_02X2.50MM_STRAIGHT | 1 | XH_2P_CONNECTOR |
| 14 | Extruder_Motor | CN3 | CONN-TH_430450427 | 1 | 430450427 |
| 15 | PT100 | CN12 | CONN-TH_430450427 | 1 | 430450427 |
| 16 | PT100 Header | CN10 | JST XH-04 | 1 | JST_XH CONNECTOR |
| 17 | Endoscope | CN9 | JST XH-04 | 1 | JST_XH CONNECTOR |
Comments (0)