© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD Camputers Lynx PSU from ATX
License: Public Domain
Mode: Editors' pick
A simple PCB to take an ATX PSU (especially a PICO ATX board) and provide +5v, -5v and 12v. Whilst ostensibly for the Camputers Lynx this will also be useful for many other older devices which need the, often tricky to get, -5v supply.
The V7805 can probably be changed to a 7905 if you take the source from the -12V line of the ATX, but then you'll also have to make changes to deal with the heat output.
The PCB also has points for an LED, FAN and SWITCH. The LED and FAN are optional, but probably useful if placed into a case, the switch is needed to activate the ATX supply.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 22uf 16v | C5 | CAP-D5.0×F2.0 | 1 |
2 | 10uf 25v | C7 | CAP-D5.0×F2.0 | 1 |
3 | FAN | H1 | HDR-F-2.54_1X2 | 1 |
4 | TO LYNX | H2 | HDR-F-2.54_1X6 | 1 |
5 | SWITCH | H3 | HDR-F-2.54_1X2 | 1 |
6 | LED | H4 | HDR-F-2.54_1X2 | 1 |
7 | ATX24RH | J2 | ATX24_RIGHT_ANGLE | 1 |
8 | 330 | R1 | R0805 | 1 |
9 | V7805-2000 | U4 | V78031500 | 1 |
Unfold
Loading...
Do you need to add this project to the album?