Somewhat finished project. This one is a electronic dice. I know you could make one with 555 and some counter, but this project helped me to understand some things about coding. It consists of 4 boards: 1. Power supply board - charging ic, battery protection, on/off switch and charging state led's are on it. Below is some space for small li-ion cell. 2. Second board is just for separating both power supply and dice board. 3. This one uses Attiny13 for main purpose, and TTP223 for touch sensitive operation. For displaying results uses standard THT led's, either 3 or 5mm. 4. It's the same as nr 3, but with SMD led's.