© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD OPA2134 + TDA2030 Amplifier
License: CC-BY 3.0
Mode: Editors' pick
Uses OPA2134 as an voltage amplifier with TDA2030A repiters. Circuit needs modifications for individual attachments. Needs output precision ballast resistors.
R3, R4, R9, R10 nominals are individual for each PCBs.
Better solution is separate PCBs for each channel and a power supply.
OPA2134 uses non-inverted conntection.
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | PINHD-1X1 | JP1,JP2 | 1X01 | 2 |
2 | TDA2030AL-TB51-T | U3 | TO-220-5_L10.5-W15.5-P1.70-TL | 1 |
3 | 1 | R1,R2 | R_AXIAL-0.3 | 2 |
4 | 15 | R4,R3 | R_AXIAL-0.3 | 2 |
5 | 10k | R6,R7,R5,R8 | R_AXIAL-0.3 | 4 |
6 | 165 | R9,R10 | R_AXIAL-0.3 | 2 |
7 | 1k | R16,R17 | R_AXIAL-0.3 | 2 |
8 | 100k | R13,R14 | R_AXIAL-0.3 | 2 |
9 | 220u | C1,C2 | CAP-D6.3×F2.5 | 2 |
10 | OPA2134 | IC1 | PDIP-8 Texas Instruments | 1 |
11 | 10u | C5,C6 | RAD-0.1 | 2 |
12 | 470p | C7 | RAD-0.1 | 1 |
13 | 0.1u | 470P | RAD-0.1 | 1 |
14 | 22u | C3,C4 | RAD-0.2 | 2 |
15 | TDA2030 | U1,U2 | TO-220-5_PENTAWATT_MULTIWATT-5_VERTICAL_STAGGEREDTYPE1 | 2 |
16 | CONNECT_6.35 | U4,U5 | CONNECT_6.35 | 2 |
17 | R_3386P_EU | RP1 | RES-ADJ-TH_3386P | 1 |
Unfold
Loading...
Do you need to add this project to the album?