© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Arduino Alarm Clock
License: CC-BY-SA 3.0
Mode: Editors' pick
- 2
Update time：
2020-12-06 21:19:35
Creation time：
2018-01-20 10:15:42
Description
Arduino based circuit - Digital clock with alarm function.
(optional add a shake/tilt sensor for turning off the alarm)
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | ATMEGA328P-PU | U1 | DIP-28_300MIL | 1 |
| 2 | 10k | R1,R2,R3 | AXIAL-0.3 | 3 |
| 3 | Power | CN1 | 2 PIN SCREW TERMINAL 2.54 | 1 |
| 4 | CR16Mhz | Y1 | CRYSTAL_HC-49S | 1 |
| 5 | 22pF | C1,C2 | RAD-0.1 | 2 |
| 6 | DS1307+ | U2 | DIP-8 | 1 |
| 7 | 32.768KHz | X1 | 3*8 | 1 |
| 8 | CR2032 3V | B1 | BATTERY-1 | 1 |
| 9 | RC1602B-LLH-JWV CONN | JP1 | HEADER 2.54 1X12 | 1 |
| 10 | TRIMMER 20K | R4 | TRIMMER_3306F | 1 |
| 11 | BUZZER | SG1 | BUZZER-12MM | 1 |
| 12 | SET | SW1 | KEY-6.0*6.0-2 | 1 |
| 13 | ADJUST | SW2 | KEY-6.0*6.0-2 | 1 |
| 14 | ALARM | SW3 | KEY-6.0*6.0-2 | 1 |
| 15 | TILT SENSOR SW-520D (optional) | U3 | SW520D | 1 |
| 16 | Progr CONN | H1 | HDR-5X1/2.54 | 1 |
Unfold
Project Members
0
2
Collect to album
Target complaint
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?