© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD HORNO 3 IoT IMPRESIONES copy
Mode: Editors' pick
Cloned from HORNO 3 IoT IMPRESIONES
- 0
Update time：
2019-10-26 18:18:24
Creation time：
2019-10-19 22:16:26
Description
Empty
Design Drawing
schematic diagram
（
1
/
）
-
TARJETA 7/1-2 copy
Open in Editor -
TARJETA 6/2-3 copy
Open in Editor -
ESP-32 copy
Open in Editor -
WYPY copy
Open in Editor -
TARJETA 3/2 copy
Open in Editor -
TARJETA 3/1 copy
Open in Editor -
TARJETA 5/3 copy
Open in Editor -
TARJETA 5/1 copy
Open in Editor -
TARJETA 5/2 copy
Open in Editor -
Tarjeta 2/1 copy
Open in Editor -
PARTICLE ARGON copy
Open in Editor -
SEMAFORO copy
Open in Editor -
TARJETA 2/3 copy
Open in Editor -
TARJETA 2/2 copy
Open in Editor -
TARJETA 1/2 copy
Open in Editor -
TARJETA 1/1 copy
Open in Editor -
FEATHER MO WIFI copy
Open in Editor -
ARUINO NANO 22 IOT copy
Open in Editor
PCB
（
1
/
）
-
TARJET 7/1-2 copy
Open in Editor -
tarjeta 6/2-3 copy
Open in Editor -
ESP-32 copy
Open in Editor -
WYPY 3.0 copy
Open in Editor -
TARJETA 3/2 copy
Open in Editor -
TARJETA 3/1 copy
Open in Editor -
TARJETA 5/3 copy
Open in Editor -
TARJETA 5/1 copy
Open in Editor -
TARJETA 5/2 copy
Open in Editor -
LOTE-2/1 copy
Open in Editor -
PARTICLE ARGON copy
Open in Editor -
SEMAFORO copy
Open in Editor -
lote-2/3 copy
Open in Editor -
TARJETA 2/2 copy
Open in Editor -
lote-1/2 copy
Open in Editor -
LOTE 1/1 copy
Open in Editor -
FEATHER M0 WIFI copy
Open in Editor -
arduino nano 33 iot copy
Open in Editor
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | 5x20 RHOS Fuse clip/seat | U3,U1,U12,U13,U2 | 5X20 RHOS FUSE CLIP/SEAT | 5 |
| 2 | RELAY-1 | U6,U2,U4 | RELAY-1 | 3 |
| 3 | 75 | R3,R10,R13,R6,R9,R11,R7,R21,R19,R17,R15,R8,R16,R18,R20,R25,R29,R23,R27,R4,R14,R5,R1,R2 | 0805 | 24 |
| 4 | 470 | R1,R17,R13 | 0805 | 3 |
| 5 | 100 | R2,R6,R7,R12,R1,R14,R4,R5 | 0805 | 8 |
| 6 | Header-Male-2.54_1x3 | H2,H1,H3 | HDR-TH_3P-P2.54-V | 3 |
| 7 | SS-12F44-G5 | SW2,SW1 | SW-DIP-12.1X5.6 | 2 |
| 8 | WJ15EDGRC-3.81-12P | P1,P2 | WJ15EDGRC-3.81-12P | 2 |
| 9 | LM COPY | U9 | LM2569NEW COPY | 1 |
| 10 | 100uF | C2,C1 | CAP-SMD_BD6.3-L6.6-W6.6-FD | 2 |
| 11 | SN74LV04APWR | U15,U11,U19 | TSSOP-14 | 3 |
| 12 | 1K | R8,R7,R12,R11,R14,R20,R6,R24,R10,R25,R23,R18,R22,R16,R13,R9,R15,R21,R19,R17,R26,R28,R30 | 0805 | 23 |
| 13 | 2 | LED5,LED4,LED3,LED2 | LED-SMD_0805-R-RD | 4 |
| 14 | 1 | LED6,LED1 | LED-SMD_0805-R-RD | 2 |
| 15 | 4.7K | R4,R5 | R0805 | 2 |
| 16 | 100nF | C5,C3,C7,C8,C4,C6,C9,C1 | 0805 | 8 |
| 17 | WJ15EDGRC-3.81-7P | P4,P2 | WJ15EDGRC-3.81-7P | 2 |
| 18 | 0.96" 128*64 I2C OLED Display | DISP1 | OLED12864_096I2C | 1 |
| 19 | LEVEL SHIFT | U7,U8,U5,U11,U10 | LEVEL SHIFT | 5 |
| 20 | RELAY-4 | U10,U1,U2 | RELAY-4 | 3 |
| 21 | SN74HCT244PWR | U16,U4,U11,U5,U2,U14,U8,U17,U10,U7,U1,U18 | TSSOP-20 | 12 |
| 22 | double | DEMO1,PRACTICA1,U2,PRACTICA,DEMO | DOUBLE | 5 |
| 23 | ESP32 | U1 | ESP32 | 1 |
| 24 | Header-Female-2.54_2x13 | DEMO1 | HDR-13X2/2.54 | 1 |
| 25 | PCF8574T_module | U2 | PCF8574T_MODULE | 1 |
| 26 | Button-6x6x6mm | SW2,SW3 | SW-TH_4PIN-L6.00-W6.00 | 2 |
| 27 | WYPY 3.0 | U1 | WYPY 3.0 | 1 |
| 28 | Header-Female-2.54_1x6 | P1 | HDR-6X1/2.54 | 1 |
| 29 | MAX14780 | DRIVER2,DRIVER1,DRIVER3,DRIVER | MAX14780 | 4 |
| 30 | 100uF | C2,C1 | CAP-SMD_BD6.3-L6.6-W6.6-L-FD | 2 |
| 31 | PARTICLE ARGON | U1 | PARTICLE ARGON | 1 |
| 32 | FEATHER M0 WIFI | U1 | FEATHER M0 WIFI | 1 |
| 33 | Arduino Nano | M1,M2 | ARDUINO NANO | 2 |
Unfold
Project Members
0
0
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?