© 2024 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD MyAlignGuard
Mode: Editors' pick
test
Open in Editor1. MyAlignGuard_Transmitter
Open in Editor2. MyAlignGuard_Receiver
Open in Editoralignguard1
Open in EditorAlignGuard
Open in EditorAlignGuard5
Open in EditorID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | Single Oval Solder Pad | 1V,12V,J1,J2,J3,J4,J6,J7,J8,J9,J10,J11,J12,J13,J14,VEHICLE | SINGLE OVAL SOLDER PAD | 16 |
2 | 10uF | C2,C3,C4,C6 | CAP-TH_BD5.0-P2.00-D0.8-FD | 4 |
3 | 10_Pin_3.5mm_Mini_PCB_Connector_Block | CON1,CON2,CON3 | 10-WAY 3.5MM MINI PCB CONNECTOR | 3 |
4 | 1N4005 | D1,D2,D3,D4,D5,D6,D7,D8,D9 | DO-41 | 9 |
5 | Solder Pads for Battery Charger > | J5,J15 | SINGLE OVAL SOLDER PAD | 2 |
6 | G5V-1 DC12 | K1,K2,K3 | G5V-1 | 3 |
7 | HM-10 | M1,M2,M3 | HM-10-MODULE | 3 |
8 | IRF9640 | Q1 | TO-220(TO-220-3) | 1 |
9 | BS170 | Q2 | TO-92 | 1 |
10 | IRF9640 (P) | Q3,Q6 | TO-220(TO-220-3) | 2 |
11 | BS170 (N) | Q4,Q5 | TO-92 | 2 |
12 | RESISTOR-PTH-0.4 | R1,R2,R3 | RTH025W | 3 |
13 | Voltage Regulator | U1,U2,U4,U7,U9,U10,U12,U13,U14 | 5V REGULATOR | 9 |
14 | U1 | U3,U8,U11 | ARDUINO_MINI | 3 |
15 | NRF24L01_Breakout | U5,U6,U15 | NRF24L01_BREAKOUT | 3 |
Unfold
Loading...
Do you need to add this project to the album?