© 2024 EasyEDA Some rights reserved ISO/IEC
Editor Version
×
Standard
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
Profession
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 5,000 devices or 10,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
Ongoing
STD Mobula ray (internal drivers)
Mode: Editors' pick
- 3
Update time：
2020-08-18 14:53:28
Creation time：
2018-11-30 06:30:36
Description
3D printer motherboard based on STM32F407VG
1) 6 internal stepper drivers TMC2224 (same as TMC2208, but package is different)
2) 4 Heaters output (HEATBED + 3 extruders)
3) 4 Temperature input
4) 2 controlled FANs + 1 uncontrolled
5) XMIN, YMIN, ZMIN, XMAX, YMAX, ZMAX
6) 3 inputs of filament detectors
7) Bl touch connector
7) WiFi
8) EXT1/EXT2 connector
9) GSM module (external module. PCB contains connector only)
10) 9 pins availables
Design Drawing
schematic diagram
（
1
/
）
PCB
（
1
/
）
The preview image was not generated, please save it again in the
editor.
| ID | Name | Designator | Footprint | Quantity |
|---|---|---|---|---|
| 1 | Hotbead | LED1 | LED-0805 | 1 |
| 2 | Extruder1 | LED2 | LED-0805 | 1 |
| 3 | 10 | R20,R7,R8,R18,R37,R13 | 0603 | 6 |
| 4 | 100K | R4,R9,R10,R19,R38,R14 | 0603 | 6 |
| 5 | 3.3K | R5,R6,R11,R24,R21,R36,R12 | 0603 | 7 |
| 6 | Extruder2 | LED3 | LED-0805 | 1 |
| 7 | 22 | R22,R15 | 0603 | 2 |
| 8 | 1.5K | R25 | 0603 | 1 |
| 9 | 47K | R23,R26,R30,R31,R32 | 0603 | 5 |
| 10 | 100nF | C19,C28,C32,C33,C26,C30,C39,C52,C53,C54,C55,C56,C57,C10,C16,C1,C2,C3,C7,C8,C35,C42,C43,C45,C49,C50,C59,C63,C64,C66,C70,C71,C73 | C0603 | 33 |
| 11 | AMS1117-3.3 | U10 | SOT-223 | 1 |
| 12 | Power | LED5 | LED-0805 | 1 |
| 13 | 10 uF | C20 | 0603 | 1 |
| 14 | 10KΩ | R16,R17,R41,R33 | 0603 | 4 |
| 15 | 1N4148W | D2 | SOD-123 | 1 |
| 16 | 49S8M | Y1 | HC49US | 1 |
| 17 | 22pF | C21,C22 | C0603 | 2 |
| 18 | 47uF | C25,C13 | C0603 | 2 |
| 19 | 100uH | L1 | AXIAL-0.5 | 1 |
| 20 | FAN2 | LED6 | LED-0805 | 1 |
| 21 | 4.7K | R39,R40,R28,R34,R35,R29 | 0603 | 6 |
| 22 | BC847A | Q8 | SOT23-3 | 1 |
| 23 | LED | LED8 | LED-0805 | 1 |
| 24 | FAN1 | LED4 | LED-0805 | 1 |
| 25 | 1N4007 | D4 | 1N4007_SURFACE_MOUNT_M1_THRU_M7 | 1 |
| 26 | BOOT0 | CN1 | H3-2.54 | 1 |
| 27 | Reset | SW3 | KEY-6.0*6.0 | 1 |
| 28 | 22nF | C4,C6,C37,C40,C46,C48,C60,C62,C67,C69,C74,C76 | C0603 | 12 |
| 29 | 2.2uF | C5,C38,C47,C61,C68,C75 | C0603 | 6 |
| 30 | 10nF | C12,C14 | C0603 | 2 |
| 31 | USB-B-Female-TH_C46393 | USB1 | USB-M-49 | 1 |
| 32 | Header-Male-2.54_1x4 | EXT3_DRV,EXT2_DRV,X_DRV,Y_DRV,Z_DRV,EXT1_DRV | DIP-1X4P-2.54MM-M | 6 |
| 33 | 470uF | C34 | CAP-D12.5XH13.5 | 1 |
| 34 | 10uF | C9,C18,C41,C23 | 0603 | 4 |
| 35 | Header-Male-2.54_1x3 | BLTOUCH1 | HDR-3X1/2.54 | 1 |
| 36 | LM2940G-12V-AA3-R | U11 | SOT-223 | 1 |
| 37 | XH-2A black RHOS | FAN2,TBED1,TEXTR1,TEXTR2,FAN3,+5V,+3.3V,FAN1,TEXTR3 | XH-2A | 9 |
| 38 | 0.1Ω | R1,R2,R3,R42,R43,R44,R45,R46,R47,R48,R49,R50 | 2512 | 12 |
| 39 | Header-Male-2.54_1x5 | H1,H4 | DIP-1X5P-2.54MM-M | 2 |
| 40 | XH-3A | XMIN,YMIN,ZMIN,XMAX,YMAX,ZMAX,FILAMENT1,FILAMENT2,POWER_CONTROL,FILAMENT3 | XH-3A | 10 |
| 41 | 100uF | C11,C29,C17,C24,C44,C58,C65,C72 | CAP-D6.3XH7.7 | 8 |
| 42 | Header-Male-2.54_1x4 | I2C,UART,GSM,SPI | 210S-1X4P | 4 |
| 43 | HDR-IDC-2.54-2X5P | EXP1,EXP2 | HDR-IDC-2.54-2X5P | 2 |
| 44 | TC4427AEOA713 | U1,U7,U8 | SOIC-8_150MIL | 3 |
| 45 | Micro SD Card Holder; | J1 | MICRO-SD9+4P-SMD-16.1X14.5X1.85MM | 1 |
| 46 | IRLR8743TRPBF | Q1,Q2,Q3,Q4,Q5,Q6 | TO-252-2-COLD | 6 |
| 47 | 74HC4051PW,118 | U14 | TSSOP-16 | 1 |
| 48 | TMC2224 | U2,U3,U4,U5,U6,U12 | QFN28G_0.5-5X5MM | 6 |
| 49 | KF301-2P | EXTRUDER1,EXTRUDER2,EXTRUDER3 | KF301-2P | 3 |
| 50 | PADI | U25 | PADI(RTL8710) | 1 |
| 51 | Header-Male-2.54_1x2 | BLTOUCH2,H2,H3,H5 | HDR-2X1/2.54 | 4 |
| 52 | SS54 | D1 | SMB(DO-214AA) | 1 |
| 53 | 220uF | C31 | CAP-D6.3XH5.5 | 1 |
| 54 | S3MB | D3 | SMB(DO-214AA) | 1 |
| 55 | XH-4AK M | E3,E2,E1,X,Y,Z,Z1,Z2 | XH-4A | 8 |
| 56 | 47uH | L5 | SMD-10.0X10.0-10A50 | 1 |
| 57 | KF129-5.08 | HEATBED,POWER | KF129-5.08 | 2 |
| 58 | LM2596R-5.0 | U9 | TO-263-5 | 1 |
| 59 | 100uF | C27 | CAP-D6.3XH5.5 | 1 |
| 60 | STM32F407VGT6 | U13 | LQFP-100_14X14X05P | 1 |
Unfold
Project Members
0
3
Collect to album
Related Projects
Change a batch
Loading...
Add to album
×
Loading...
reminder
×
Do you need to add this project to the album?