License

TAPR Open Hardware License

Recommend Projects

WiFi Enabled 2.4" Touch Screen with SD Reader

9 months ago 1207
  • Description
  • Documents
  • BOM
  • Attachments
  • Members
  • Comments

Description

Simple yet powerfull!

P1010032.JPG

This board provides solid connection between Wemos D1 mini (ESP8266) and 2.4" TFT ILI9341 XPT2046 SPI Display (TJCTM24024-SPI). The main goal is to build cheap wi-fi enabled display with touch interface for use in various IoT projects. Display communicates with ESP8266 via SPI (display, touch and SD card reader). Displays interrupt is connected do D0 pin allowing for waking up ESP8266 from Deep Sleep state.

LCD LED backlight is driven via P-Channel MOSFET via D3 pin (high side transistor switch). Out of the box backlight is connected to 3V3. In order to drive backlight you need to cut J1 jumper and populate Q1 MOSFET (FDV304P) and R1 restistor (10k).

Additional header may be used as general purpose UART, I2C, One Wire or Analog In. Pin order allow to directly solder BME280 module. Also we put I2C connector in Nettigo PSIIC form factor (compatible with SparkFun Qwiic & Adafruit STEMMA QT).

PCB1843.png

Pinout

  • Standard ESP8266 SPI interface:
    • SCK - D5
    • MISO - D6
    • MOSI - D7
  • LCD Chip Select - D8
  • LCD D/C - D1
  • LCD Reset - RST
  • LCD Backlight (via MOSFET) - D3
  • Touch Chip Select - D2
  • Touch IRQ - D0
  • SD Card Reader Chip Select - D4
  • I2C SCL / UART RX - RX
  • I2C SDA / UART TX - SDA

Powering up the board

  • directly from micro USB, or
  • feeding 3.3V to 3V3 pin, or
  • feeding ~5V to 5V pin (voltage depends on what LDO is in your Wemos. Usually 4-6V is save value)

Documents

NAM Info display

NAM Info display PCB 0.2.3

BOM

ID Name Designator Footprint Quantity
1 JUMPER-NC J1 PAD-JUMPER-2-NC_BY_TRACE_YES_SILK 1
2 Header-Male-2.54_1x3 P2 HDR-3X1/2.54 1
3 FDV304P Q1 SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR 1
4 10KΩ R1 0603 1
5 2.4 TFT ILI9341 XPT2046 SPI U2 2.4 TFT ILI9341 XPT2046 SPI 1
6 SM04B-SRSS-TB (LF)(SN) CN1 SMD-1.0MM-4P-JST-H2.9 1
7 Nettigo Wemos D1 mini V2 U1 NETTIGO WEMOS D1 MINI V2 1
8 Header-Female-2.54_1x6 P1 HDR-6X1/2.54 1

Attachments

None
Success
The owner does not allow comments in this project now

Comments (0)

goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.