© 2023 EasyEDA Some rights reserved ISO/IEC
1.Easy to use and quick to get started
2.The process supports design scales of 300 devices or 1000 pads
3.Supports simple circuit simulation
4.For students, teachers, creators
1.Brand new interactions and interfaces
2.Smooth support for design sizes of over 30,000 devices or 100,000 pads
3.More rigorous design constraints, more standardized processes
4.For enterprises, more professional users
STD esk8 remote
Mode: Editors' pick
ID | Name | Designator | Footprint | Quantity |
---|---|---|---|---|
1 | 10uF | 220UF,C3 | CAP-D5.0XF2.0 | 2 |
2 | battery | BAT | HDR-1X2/2.54 | 1 |
3 | booster | BOOST/CHRG | HDR-6X1/2.54 | 1 |
4 | 0.1uF | C4 | CAP-D5.0XF2.0 | 1 |
5 | 100uF | C5 | CAP-D5.0XF2.0 | 1 |
6 | switch | DM,SW | HDR-1X2/2.54 | 2 |
7 | hall sensor | HALL | 1X3 PIN HEADER 2.54MM | 1 |
8 | ARDUINO NANO | NANO,U1 | ARDUINO_NANO | 2 |
9 | nrf24 | NRF | 8PIN 1.27MM | 1 |
10 | Female header pitch2.54mm | OLED | HDR-4X1/2.54 | 1 |
11 | on-off | ON/OFF | HDR-1X2/2.54 | 1 |
12 | usb | P2 | HDR-1X2/2.54 | 1 |
13 | 10k | R1 | AXIAL-0.3 | 1 |
14 | MCP130T/OPTIONAL JUST IN CASE BOOT UP ISSUES | U1 | SOT-23(SOT-23-3) | 1 |
15 | 1u | C1 | RAD-0.1 | 1 |
16 | NRF24l01+LNA+PA | U2 | NRF24L01+LNA+PA | 1 |
17 | 0.91" 128x32 OLED Display | U3 | NONE | 1 |
18 | Hall Sensor | U4 | DIP | 1 |
19 | -SWITCH | U5,U7,U8,U9 | CON3 | 4 |
20 | BoostConverter | U6 | BOOSTCONV_LAYOUT | 1 |
21 | TP4056 Module | U10 | TP4056 MODULE | 1 |
22 | 3.7V | V1 | BATTERY-1 | 1 |
Unfold
Loading...
Do you need to add this project to the album?