Altitude/Pressure Sensor Breakout - MPL3115A2 (Open hardware)

4 years ago 415
  • Description
  • Documents
  • BOM
  • Attachments
  • Members
  • Comments

Description

Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.

This breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1" spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work!

Features:

1.95V to 3.6V Supply Voltage, internally regulated by LDO 1.6V to 3.6V Digital Interface Supply Voltage Fully Compensated internally Direct Reading, Compensated Pressure: 20-bit measurement (Pascals) Altitude: 20-bit measurement (meters) Temperature: 12-bit measurement (degrees Celsius) Programmable Events Autonomous Data Acquisition Resolution down to 1 ft. / 30 cm 32 Sample FIFO Ability to log data up to 12 days using the FIFO 1 second to 9 hour data acquisition rate I2C digital output interface (operates up to 400 kHz)

GitHub (Design Files & Example Code) GitHub (Library) Sparkfun link:https://www.sparkfun.com/products/11084

enter image description here

Documents

MPL3115A2_breakout SCH

MPL3115A2_breakout PCB

BOM

ID Name Designator Quantity
1 FRAME-LETTER FRAME1 1
2 MPL3115A2 U1 1
3 0.1uF C1,C3 2
4 1k R1,R2 2
5 10uF C2 1
6 OSHW-LOGO U$1 1
7 LOGO-SFE JP1,JP5 2
8 STAND-OFF JP2,JP3 2
9 M06 JP4 1
10 1uF C4 1
11 CREATIVE_COMMONS U$2 1
12 FIDUCIAL JP6,JP7 2

Attachments

None

Members

Success
The owner does not allow comments in this project now

Comments (0)

goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.