Editor Version ×
Standard

1.Easy to use and quick to get started

2.The process supports design scales of 300 devices or 1000 pads

3.Supports simple circuit simulation

4.For students, teachers, creators

Profession

1.Brand new interactions and interfaces

2.Smooth support for design sizes of over 5,000 devices or 10,000 pads

3.More rigorous design constraints, more standardized processes

4.For enterprises, more professional users

Ongoing

STD ESP8266 Thing (Open hardware)

License:

Mode: Editors' pick

  • 3.1k
  • 0
  • 2
Update time: 2021-04-09 19:38:07
Creation time: 2015-10-17 07:52:46
Description
Description: The ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires. Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with phant.io, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon. The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins. Features: All module pins broken out On-board LiPo charger/power supply 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLLs, regulators, DCXO and power management units Integrated low power 32-bit CPU could be used as application processor +19.5dBm output power in 802.11b mode [GitHub][1] (Design Files) Sparkfun link:[https://www.sparkfun.com/products/13231][2] [1]: https://github.com/sparkfun/ESP8266_Thing [2]: https://www.sparkfun.com/products/13231
Design Drawing
schematic diagram
1 /
PCB
1 /
The preview image was not generated, please save it again in the editor.
ID Designator Footprint Quantity
1 FRAME1 CREATIVE_COMMONS 1
2 U1 QFN32 1
3 C1 0603-CAP 1
4 C2,C10 0603-CAP 2
5 Y1 CRYSTAL-SMD-3.2X2.5 1
6 JP4 FTDI_BASIC 1
7 L1,L2 0603 2
8 C8 0603-CAP 1
9 J1 U.FL 1
10 C6 0603-CAP 1
11 R6,R3,R7,R17 0603-RES 4
12 JP5 1X04 1
13 R15 0603-RES 1
14 U3 SO08 1
15 U5 UDFN8 1
16 R13,R11 0603-RES 2
17 C7 0805 1
18 C9 0603-CAP 1
19 U2 SOT23-5 1
20 JP1 USB-B-MICRO-SMD_V03 1
21 C5 0603-CAP 1
22 D3 SOD-323 1
23 JP2 JST-2-PTH 1
24 SJ2 PAD-JUMPER-3-3OF3_NC_BY_TRACE_YES_SILK_FULL_BOX 1
25 R9 0603 1
26 R10 0603-RES 1
27 STANDOFF3,STANDOFF1,STANDOFF2,STANDOFF4 STAND-OFF 4
28 FID2,FID1 FIDUCIAL-1X2 2
29 D1 LED-0603 1
30 TP7,TP6,TP5,TP1,TP2,TP3,TP4 PAD.03X.05 7
31 LOGO1 SFE_LOGO_NAME_.2 1
32 LOGO3 SFE_LOGO_FLAME_.1 1
33 LOGO4 OSHW-LOGO-S 1
34 E1 TRACE_ANTENNA_2.4GHZ_25.7MM 1
35 C3,C4 0603-CAP 2
36 R1 0603-RES 1
37 R8,R5,R2,R16 0603-RES 4
38 U4 SOT23-5 1
39 C11,C12 0603-CAP 2
40 Q1 SOT23-3 1
41 JP3 1X10 1
42 U6 SOT563-2 1
43 D5 SOD-323 1
44 SJ4 PAD-JUMPER-2-NO_YES_SILK 1
45 S1 SWITCH-SPST-SMD-A 1
46 SJ3 PTH-JUMPER-NC_BOTTOM_NO_SILK 1
47 U7 FN-6 1
48 D4 LED-0603 1
49 D2 LED-0603 1
50 SJ1 PAD-JUMPER-2-NC_BY_TRACE_YES_SILK 1
51 R4 0603-RES 1

Unfold

Project Attachments
Empty
Project Members
Target complaint
Related Projects
Change a batch
Loading...
Add to album ×

Loading...

reminder ×

Do you need to add this project to the album?

服务时间

周一至周五 9:00~18:00
  • 0755 - 2382 4495
  • 153 6159 2675

服务时间

周一至周五 9:00~18:00
  • 立创EDA微信号

    easyeda

  • QQ交流群

    664186054

  • 立创EDA公众号

    lceda-cn